Residential
Business MyGLOBUL
BG
EN
Main content
:: home > GLOBUL 2in1 > STEP BY STEP
 

STEP BY STEP


FINDING THE GLOBUL 2IN1 MENU IN YOUR PHONE

The GloBul 2in1 menu is a part of the GloBul Services menu. The GloBul Services >> GloBul 2in1 menu can be disposed differently depending on your phone brand and model*:

Brand Steps
Nokia Menu > GloBul Services >>  GloBul 2in1
Sony Ericsson Menu > Connectivity >> GloBul Services >>>  GloBul 2in1
Motorola Menu > Office Tools >> GloBul Services >>>  GloBul 2in1
Samsung Menu > GloBul Services >>  GloBul 2in1
Siemens Menu > Extras >> GloBul Services >>>  GloBul 2in1
LG Menu > GloBul Services >> GloBul 2in1
* It is possible that the GloBul Services >> GloBul 2in1 menu shows up at a different place according to your phone model.

ACTIVATING A LINE AND LINKING THE LINES

With this operation you choose which line will be active and you set up a linkage status for your lines.
The linkage status defines whether you will be accepting incoming calls to both the lines or to the active line only. When you have your lines linked you will be accepting calls to both the lines, irrespective of which one of them will be the active one. When you have your lines unlinked you will be receiving calls to the active line only.
You can originate calls, send SMS and MMS, as well as data, from the active line only. Incoming calls, SMS and data you can receive on:

  • The active line only in unlinked state
  • Both the lines in linked state

Incoming MMS will be received on the active line only.

When you set up the active line and the linkage status you have the following 4 options:

1. Line 1 active, accepting calls to Line 1 only
This state is set up by default in your card. While in this state the two lines are unlinked and you will be receiving calls to Line 1 only. If somebody tries to reach you on Line 2 at this moment you will be unavailable for him/her just like when your phone is switched off.

2. Line 1 active, accepting calls to both the lines
Your lines are linked and you will be reachable on both of them.

3. Active Line 2, accepting calls for Line 2 only
Your lines are unlinked and you will be receiving calls to Line 2 only.

4. Active Line 2, accepting calls to both the lines
Your lines are linked and you will be receiving calls to both of them.

Only one of the lines can be active for your outgoing calls at the same time.

SET UP ACTIVE LINE AND LINKAGE STATUS

  • The state set up in your card by the operator is Line 1 active, accepting calls to Line 1 only. To activate linked state you should go to GloBul 2in1>>Aktivna L[1]>>I dvete linii.
  • If you wish to make Line 2 active for your outgoing calls you should go to GloBul 2in1>Premini na L[2]. After you have Line 2 activated you can define the linkage status by selecting GloBul 2in1>Aktivna L[2] >>Samo L[2], or>> I dvete linii.

By analogy you can change the active line and the linkage state each time you wish to. These changes are free of charge.

Advice: If you are facing some difficulties with the activation of any of the lines when you put the GloBul 2in1 SIM card in your phone for the first time, exit the GloBul 2in1 menu, then enter it again and try to activate the other line.

Every time you switch your phone on, the active line and the linkage status set up before switching it off will be the actual state.

Note: In the GloBul 2in1 SIM card with prepaid service Line 1 is always the prepaid line.

The active line is visible on your phone display anytime. Of course, it depends on the phone itself and the display settings.

STATUS CHECK

You can check the linkage status anytime you wish to. Select GloBul 2in1>>Nastroika ime. If the lines are linked the message on your display will read “Priemate povikvania I kam dvete linii”. If the lines are unlinked the message will be “Priemate povikvania samo kam aktivnata linia”.

LINE NAMING

For your convenience you can define your own names for the lines, so that you will be able to distinguish them better. For example you can name one of the lines “BUSINESS” and the other one “PERSONAL”.
The active line will be showing up on the display with the name that you have defined.
The initial names of the lines in your GloBul 2in1 SIM card are “1” and “2”. To rename them select GloBul 2in1 > Nastroika ime. You can rename the lines as many times as you wish to.

Note: in order to see the newly defined name for a line you will need to switch your phone off and then switch it on.

HELP

In the help menu you can find instructions how to operate with your GloBul 2in1 SIM card.